eng7 2-3-1 bloc 1c (cba).rtf f1b.pdf
Стр. 1–2
Translation from Romanian into English
2026-407
Reconstruction of the terminal
building of “Eugen Doga”
International Airport - Chisinau
(cadastral no. 0100120.236.01),
including partial replanning of
internal spaces and building extension
Object No.
Form No. 1B
(name of the facility) WinEstimate
Cost Estimate-Offer No. 2-3-1
BLOCK 1C Phase 4
Reinforced Concrete Structures (RC section)
(name of works)
Coefficient for basic wages = 1,150
Coefficient for cost of machine operation = 1,150
No. Norm
symbol and
resource
code
Description of works
Unit of
measure
(U.M.)
Quantity
according to the
design data
1 2 3 4 5
1. Demolitions
1 RCsB28G
Demolition of old reinforced concrete by
mechanical means / dismantling of
reinforced concrete grillage and beams
m³ 50,00
7123010010200 Concrete worker man-
hours
230,00
9310060019920 Worker servicing ST man-
hours
117,875
4100116202818 Water for mortars and concrete m³ 2,50
2912340002509 Mobile low-pressure air compressor, capacity
4.0–5.9 m³/min
machine-
hours
20,125
2952270003380 Pneumatic hammer 8–15 kg machine-
hours
20,125
2922140006703 Window crane, capacity 0.0015 meganewtons
(MN) (0.15 ton-force (tf))
machine-
hours
11,50
2 RCsP44B
Dismantling of steel structures without
recovery of materials / dismantling of
metal beams
Small materials (grease, gasoline, rags, etc.) =
1,030
kg 19 917,30
7214240021800 Mechanical fitter man- 274,859
1 2 3 4 5
hours
7212030022700 Welder man-
hours
57,262
9310060019922 Service worker man-
hours
22,905
2413547308164 Technical calcium carbide (carbide) S102 kg 8,206
2411115904512 Technical gaseous oxygen S2031 m³ 12,309
2410520006751 Truck crane, 4.5–9.9 ton-force (TF); machine-
hours
4,581
3 RCsB28G
Demolition of old reinforced concrete by
mechanical means / dismantling of
reinforced-concrete columns
m³ 8,82
7123010010200 Concrete worker man-
hours
40,572
9310060019920 Worker servicing ST man-
hours
20,793
4100116202818 Water for mortars and concrete m³ 0,441
2912340002509 Mobile low-pressure air compressor, capacity
4.0–5.9 m³/min
machine-
hours
3,55
2952270003380 Pneumatic hammer 8–15 kg machine-
hours
3,55
2922140006703 Window crane, capacity 0.0015 meganewtons
(MN) (0.15 ton-force (tf))
machine-
hours
2,029
4 RCsB28G
Demolition of old reinforced concrete by
mechanical means / dismantling of
underground service ducts
m³ 130,00
7123010010200 Concrete worker man-
hours
598,00
9310060019920 Worker servicing ST man-
hours
306,475
4100116202818 Water for mortars and concrete m³ 6,50
2912340002509 Mobile low-pressure air compressor, capacity
4.0–5.9 m³/min
machine-
hours
52,325
2952270003380 Pneumatic hammer 8–15 kg machine-
hours
52,325
2922140006703 Window crane, capacity 0.0015 meganewtons
(MN) (0.15 ton-force
Стр. 2–3
ressor, capacity
4.0–5.9 m³/min
machine-
hours
52,325
2952270003380 Pneumatic hammer 8–15 kg machine-
hours
52,325
2922140006703 Window crane, capacity 0.0015 meganewtons
(MN) (0.15 ton-force (tf))
machine-
hours
29,90
5 RCsP44B
Dismantling of steel structures without
recovery of materials / dismantling of
metal cover plates of service ducts
Small materials (grease, gasoline, rags, etc.) =
1,030
kg 801,00
7214240021800 Mechanical fitter man-
hours
11,054
7212030022700 Welder man-
hours
2,303
9310060019922 Service worker man-
hours
0,921
2413547308164 Technical calcium carbide (carbide) S102 kg 0,33
2411115904512 Technical gaseous oxygen S2031 m³ 0,495
2410520006751 Truck crane, 4.5–9.9 ton-force (TF); machine-
hours
0,184
6 TsC03G1 Mechanical excavation with excavator 100 m³ 1,90
1 2 3 4 5
0.40–0.70 m³, with internal combustion
engine and hydraulic control, in soil with
natural moisture, unloading into vehicles,
terrain category III / loading
2952260003501 Crawler excavator, single-bucket, with internal
combustion engine, 0.40–0.70 m³
machine-
hours
5,681
7 TsI51B5
Transportation of construction debris by
10 tonne dump truck over a distance of
15 kilometres
tonne 474,00
3410540000007 Dump truck, 10 tonnes machine-
hours
41,428
Total Demolitions
2. Foundations
2.1. Pile Pm-1 (91 pieces)
8 CQ23A
Execution of bored reinforced concrete
piles in stable soils of Group II using an
SBU-type installation, with a diameter up
to 500–600 mm, concreting by the
Tremie Pipe Method, with a length up to
12 m. Note: Concrete C20/25,
Reinforcement cage – 15,224.3 kg
Small materials (drilling tool, metal inventory
device, water, etc.) = 1,030
m³ 254,80
9310060019930 Worker man-
hours
3 349,219
2663102100002
0
Concrete C20/25 m³ 299,186
2873155901202 Electrodes E42A, diameter 6 mm kg 26,244
2722103305015
Reusable steel tremie pipe set (loading hopper,
lifting section, connecting flange), outer diameter
250–325 mm
m 6,299
2710602000090 Reinforcement cages kg 15 224,30
2952270003629 Pile drilling and casting installation coupled to a
crawler crane, 25 ton-force (tf)
machine-
hours
937,664
2940420002445 Welding unit with diesel engine, nominal welding
current 250–400 A
machine-
hours
67,395
2952270003100 Deep vibrator machine-
hours
208,044
Total Pile Pm-1 (91
pieces)
2.2. Monolithic raft slabs
9 CA02C
Plain concrete cast for leveling layers,
slopes and screeds at heights up to 35 m
inclusive, prepared by concrete batching
plant or ready-mix concrete, placed by
m³ 33,20
Стр. 3–5
t slabs 9 CA02C Plain concrete cast for leveling layers, slopes and screeds at heights up to 35 m inclusive, prepared by concrete batching plant or ready-mix concrete, placed by m³ 33,20 1 2 3 4 5 conventional means, class C8/10 Small materials (softwood planks) = 1,010 7123010010200 Concrete worker man- hours 146,993 9310060019920 Worker servicing ST man- hours 24,817 2663102100000 150 Concrete C8/10 m³ 34,37 4100116202818 Water for mortars and concrete m³ 3,353 2922140007000 Crane machine- hours 9,545 2952270003000 Surface vibrator machine- hours 15,272 10 CA03G Placing of concrete in reinforced structures of foundations, plinths, retaining walls and walls below zero level, concrete prepared at the ready-mix concrete plant or ready-mix concrete in accordance with CA01, placed by conventional means, reinforced concrete class C20/25 Small materials (softwood planks, nails, staples) = 1,015 m³ 169,10 7123010010200 Concrete worker man- hours 777,86 9310060019920 Worker servicing ST man- hours 77,786 2663102100000 20 Concrete C20/25 m³ 175,927 4100116202818 Water for mortars and concrete m³ 17,164 2952270003100 Deep vibrator machine- hours 116,679 3410520006752 Truck crane, 6–10 tf machine- hours 48,616 11 CB02A Formwork from reusable panels with sheathing of short and very short softwood boards for placing concrete in pads, cup foundations and equipment foundations, including fastenings m² 427,00 9310060019920 Worker servicing ST man- hours 73,657 7124010010700 1 Carpenter man- hours 515,602 2874125881241 Standard washers M10 kg 2,135 2874115841033 Standard square nuts M10 pieces 128,10 2874115825003 Standard square bolts M10 × 140 mm pieces 128,10 2875276311528 Steel construction staples kg 12,81 2734113803233 Soft black wire, diameter 2.5 mm kg 21,35 2873145887000 Conical head nails, type A kg 34,16 2020212928347 Formwork panel type P, beech plywood 15 mm m² 42,70 2010102903495 Softwood boards m³ 1,494 2010102900900 Softwood round timber m³ 0,213 2320187315789 Formwork release agent (Decofrol) kg 51,24 1 2 3 4 5 12 CC01E Rebar steel class OB 37, placed in strip foundations and raft beams, fabricated in centralized workshop, bar diameter up to 8 mm inclusive kg 965,00 7123020011140 Rebar worker man- hours 71,024 9310060019920 Worker servicing ST man- hours 3,329 2710602100000 Rebar steel OB 37 ≤ 8 mm kg 989,125 2010237318750 Spacers pieces 144,75 2734113803881 Soft black steel wire, diameter 1 mm kg 9,65 13 CC01F1 Rebar steel class PC 52, placed in strip foundations and raft beams, fabricated in site workshop, bar diameter over 8 mm kg 8 950,60 7123020011140 Rebar worker man- hours 555,832 9310060019920 Worker servicing ST man- hours 30,88 2710602200000 Rebar steel PC 52 > 8 mm kg 9 174,365 2010237318750 Spacers pieces 1 342,59 2734113803881 Soft black steel wire, diameter 1 mm kg 89,506
Стр. 5–6
920 Worker servicing ST man-
hours
30,88
2710602200000 Rebar steel PC 52 > 8 mm kg 9 174,365
2010237318750 Spacers pieces 1 342,59
2734113803881 Soft black steel wire, diameter 1 mm kg 89,506
14 CL57A
Installation and fixing of embedded parts
in monolithic reinforced concrete, weight
up to 4 kg / P-14, P-2
Small materials and installation materials (grease,
rags, kerosene, etc.) = 1,010
kg 215,90
7136080025001 Installer man-
hours
52,14
2811236309900 Metal fabrications kg 226,781
2412126100010 Red lead (minium) kg 4,361
2873155900311 Electrodes E-42A, diameter 4 mm kg 2,181
3110500002401 Welding machine, 28–35 kW machine-
hours
19,863
2922140006702 Window crane machine-
hours
2,483
Total Monolithic raft
slabs
2.3. Soil transportation
15 TsC03F1
Mechanical excavation with excavator
0.40–0.70 m³, unloading into vehicles,
soil with natural moisture, category II
(loading of soil from piles)
100 m³ 2,50
2952260003501 Crawler excavator, single-bucket, with internal
combustion engine, 0.40–0.70 m³
machine-
hours
6,469
16 TsI51B5
Transportation of soil by 10 tonne dump
truck over a distance of 15 kilometres
tonne 418,00
1 2 3 4 5
3410540000007 Dump truck, 10 tonnes machine-
hours
36,533
Total Soil transportation
Total Foundations
3. Columns
3.1. Monolithic columns Cm-1 (22 pieces)
17 RCsB04D
Ready-mix concrete delivered from the
ready-mix concrete plant and placed by
conventional means in columns, beams,
ribs, slabs, landings, staircases, retaining
walls, reinforced concrete pads, floor
slabs, diaphragms, stair flights, etc., in
existing buildings / C20/25 (M350)
Small materials (boards, wire, nails, etc.) = 1,020
m³ 50,60
7123010010200 Concrete worker man-
hours
254,872
9310060019920 Worker servicing ST man-
hours
140,238
2663102100000
20
Concrete C20/25 m³ 52,902
4100116202818 Water for mortars and concrete m³ 6,193
2952270003101 Poker vibrator machine-
hours
34,914
3410520001373 Truck crane, 5 ton-force (tf) machine-
hours
8,728
18 CB03F
Formwork from reusable plywood panels,
15 mm thick, for concreting columns in
structures up to 20 m in height inclusive,
excluding fastenings
m² 289,00
9310060019920 Worker servicing ST man-
hours
83,087
7124010010700 Carpenter man-
hours
332,35
2874125881241 Standard washers M10 kg 2,312
2874115841033 Standard square nuts M10 pieces 14,45
2874115825003 Standard square bolts M10 × 140 mm pieces 14,45
2875276311528 Steel construction staples kg 14,45
2873145887000 Conical head nails, type A kg 11,56
2030122928385 Formwork panel with 15 mm plywood m² 43,35
2010102904340 Softwood planks m³ 0,289
2010102903495 Softwood boards m³ 0,433
2320187315789 Formwork release agent (Decofrol) kg 34,68
3410520006752 Truck crane, 6–10 tf machine-
hours
6,647
19 RCsD01D
R
Стр. 6–7
Softwood planks m³ 0,289 2010102903495 Softwood boards m³ 0,433 2320187315789 Formwork release agent (Decofrol) kg 34,68 3410520006752 Truck crane, 6–10 tf machine- hours 6,647 19 RCsD01D Rebar steel OB 37, diameter up to 8 mm inclusive, fabricated in a site workshop for foundations and raft beams, installed in existing structural elements. kg 508,64 1 2 3 4 5 Fabrication of reinforcement for flat slabs, columns, beams, etc. 7123020011140 Rebar worker man- hours 46,795 9310060019920 Worker servicing ST man- hours 17,548 2710602000030 Plain rebar steel OB 37 STAS 438 diameter 6 mm kg 521,356 2746133803142 Ordinary soft wire, diameter 1.25 mm kg 5,086 2010237318750 Spacers pieces 76,296 2952270004203 Electric rebar cutting machine, for bar diameter up to 40 mm machine- hours 1,638 2940340004205 Rebar bending machine machine- hours 2,047 2922140006703 Window crane, capacity 0.0015 meganewtons (MN) (0.15 ton-force (tf)) machine- hours 20,473 2952270006612 Rebar tensioning winch OB machine- hours 1,462 20 RCsD02D 1 Rebar steel PC 52, diameter over 8 mm, fabricated in a site workshop for foundations and raft beams, installed in existing structural elements. For flat slabs, columns, beams, etc. kg 3 927,00 7123020011140 Rebar worker man- hours 388,38 9310060019920 Worker servicing ST man- hours 135,481 2710602000038 Plain rebar steel PC 52, diameter over 8 mm kg 4 025,175 2746133803142 Ordinary soft wire, diameter 1.25 mm kg 39,27 2010237318750 Spacers pieces 589,05 2922140006703 Window crane, capacity 0.0015 meganewtons (MN) (0.15 ton-force (tf)) machine- hours 158,062 21 CL18A Various metal products made of rolled profiles, sheet steel, checkered and reinforcing steel, and pipes for supports or coverings, fully or partially embedded in concrete / 80×80×15 State Standard (GOST) 103-76 kg 99,00 7214240021810 Construction locksmith (metal fitter) man- hours 21,631 9310060019920 Worker servicing ST man- hours 1,138 7212030022700 Welder man- hours 1,138 2775276309886 Metal fabrications embedded in concrete kg 99,00 2734113803207 Soft black wire, diameter 2 mm kg 0,99 2873155901200 Welding electrodes kg 0,495 4011106202741 Electrical energy kw 0,792 1010126200341 Forge coal (hard coal) kg 1,485 22 IzD10A Anticorrosion painting by brush of metal products and structures, one coat of anticorrosion primer based on red lead tonne 0,099
Стр. 7–9
0,792
1010126200341 Forge coal (hard coal) kg 1,485
22 IzD10A
Anticorrosion painting by brush of metal
products and structures, one coat of
anticorrosion primer based on red lead
tonne 0,099
1 2 3 4 5
and two coats of chlorinated rubber
enamel.
7141020013400 Industrial painter man-
hours
0,733
2430116100000 Chlorinated rubber enamel kg 0,772
2430226100814 Red lead primer G 355-6 kg 0,386
2430226109420 Thinner for anticorrosive varnishes D.006-1 NI
1708-61 A1
kg 0,054
2320166200676 White spirit kg 0,193
1711317306661 Cleaning cotton kg 0,097
23 CC13H
Splicing of rebar steel for reinforced
monolithic concrete by bench electric
welding, using one splice plate and butt
welding, for bars with diameter 18–28
mm
pieces 264,00
7212030022700 Welder man-
hours
166,98
2873155900800 Welding electrodes kg 158,40
4011106202741 Electrical energy kw 290,40
Total Monolithic columns
Cm-1 (22 pieces)
3.2. Monolithic columns Cm-2 (12 pieces)
24 RCsB04D
Ready-mix concrete delivered from the
ready-mix concrete plant and placed by
conventional means in columns, beams,
ribs, slabs, landings, staircases, retaining
walls, reinforced concrete pads, floor
slabs, diaphragms, stair flights, etc., in
existing buildings / C20/25 (M350)
Small materials (boards, wire, nails, etc.) = 1,020
m³ 27,60
7123010010200 Concrete worker man-
hours
139,021
9310060019920 Worker servicing ST man-
hours
76,493
2663102100000
20
Concrete C20/25 m³ 28,856
4100116202818 Water for mortars and concrete m³ 3,378
2952270003101 Poker vibrator machine-
hours
19,044
3410520001373 Truck crane, 5 ton-force (tf) machine-
hours
4,761
25 CB03F
Formwork from reusable plywood panels,
15 mm thick, for concreting columns in
structures up to 20 m in height inclusive,
excluding fastenings
m² 158,00
9310060019920 Worker servicing ST man-
hours
45,425
7124010010700 Carpenter man- 181,70
1 2 3 4 5
hours
2874125881241 Standard washers M10 kg 1,264
2874115841033 Standard square nuts M10 pieces 7,90
2874115825003 Standard square bolts M10 × 140 mm pieces 7,90
2875276311528 Steel construction staples kg 7,90
2873145887000 Conical head nails, type A kg 6,32
2030122928385 Formwork panel with 15 mm plywood m² 23,70
2010102904340 Softwood planks m³ 0,158
2010102903495 Softwood boards m³ 0,237
2320187315789 Formwork release agent (Decofrol) kg 18,96
3410520006752 Truck crane, 6–10 tf machine-
hours
3,634
26 RCsD01D
Rebar steel OB 37, diameter up to 8 mm
inclusive, fabricated in a site workshop
for foundations and raft beams, installed
in existing structural elements.
Fabrication of reinforcement for flat
slabs, columns, beams, etc.
kg 277,44
7123020011140 Rebar worker man-
hours
25,524
9310060019920 Worker servicing ST man-
hours
9,572
2710602000030 Plain rebar steel OB 37 STAS 438 diameter 6 mm kg 284,376
2746133803142 Ordinary soft wire,
Стр. 9–10
140 Rebar worker man-
hours
25,524
9310060019920 Worker servicing ST man-
hours
9,572
2710602000030 Plain rebar steel OB 37 STAS 438 diameter 6 mm kg 284,376
2746133803142 Ordinary soft wire, diameter 1.25 mm kg 2,774
2010237318750 Spacers pieces 41,616
2952270004203 Electric rebar cutting machine, for bar diameter
up to 40 mm
machine-
hours
0,893
2940340004205 Rebar bending machine machine-
hours
1,117
2922140006703 Window crane, capacity 0.0015 meganewtons
(MN) (0.15 ton-force (tf))
machine-
hours
11,167
2952270006612 Rebar tensioning winch OB machine-
hours
0,798
27 RCsD02D
1
Rebar steel PC 52, diameter over 8 mm,
fabricated in a site workshop for
foundations and raft beams, installed in
existing structural elements. For flat
slabs, columns, beams, etc.
kg 2 821,20
7123020011140 Rebar worker man-
hours
279,017
9310060019920 Worker servicing ST man-
hours
97,331
2710602000038 Plain rebar steel PC 52, diameter over 8 mm kg 2 891,73
2746133803142 Ordinary soft wire, diameter 1.25 mm kg 28,212
2010237318750 Spacers pieces 423,18
2922140006703 Window crane, capacity 0.0015 meganewtons
(MN) (0.15 ton-force (tf))
machine-
hours
113,553
28 CL18A
Various metal products made of rolled
profiles, sheet steel, checkered and
reinforcing steel, and pipes for supports
or coverings, fully or partially embedded
in concrete / 100 × 100 × 20 State
kg 113,00
1 2 3 4 5
Standard (GOST) 103-76
7214240021810 Construction locksmith (metal fitter) man-
hours
24,691
9310060019920 Worker servicing ST man-
hours
1,299
7212030022700 Welder man-
hours
1,299
2775276309886 Metal fabrications embedded in concrete kg 113,00
2734113803207 Soft black wire, diameter 2 mm kg 1,13
2873155901200 Welding electrodes kg 0,565
4011106202741 Electrical energy kw 0,904
1010126200341 Forge coal (hard coal) kg 1,695
29 IzD10A
Anticorrosion painting by brush of metal
products and structures, one coat of
anticorrosion primer based on red lead
and two coats of chlorinated rubber
enamel.
tonne 0,13
7141020013400 Industrial painter man-
hours
0,963
2430116100000 Chlorinated rubber enamel kg 1,014
2430226100814 Red lead primer G 355-6 kg 0,507
2430226109420 Thinner for anticorrosive varnishes D.006-1 NI
1708-61 A1
kg 0,072
2320166200676 White spirit kg 0,254
1711317306661 Cleaning cotton kg 0,127
30 CC13H
Splicing of rebar steel for reinforced
monolithic concrete by bench electric
welding, using one splice plate and butt
welding, for bars with diameter 18–28
mm
pieces 192,00
7212030022700 Welder man-
hours
121,44
2873155900800 Welding electrodes kg 115,20
4011106202741 Electrical energy kw 211,20
Total Monolithic columns
Cm-2 (12 pieces)
3.3. Monolithic columns Cm-3 (2 pieces)
31 RCsB04D
Ready-mix concrete delivered from the
ready-mix concrete plant and placed by
conventional means in columns, beams,
ribs, slabs, la
Стр. 10–11
3.3. Monolithic columns Cm-3 (2 pieces) 31 RCsB04D Ready-mix concrete delivered from the ready-mix concrete plant and placed by conventional means in columns, beams, ribs, slabs, landings, staircases, retaining walls, reinforced concrete pads, floor slabs, diaphragms, stair flights, etc., in existing buildings / C20/25 (M350) Small materials (boards, wire, nails, etc.) = 1,020 m³ 3,00 7123010010200 Concrete worker man- hours 15,111 1 2 3 4 5 9310060019920 Worker servicing ST man- hours 8,315 2663102100000 20 Concrete C20/25 m³ 3,136 4100116202818 Water for mortars and concrete m³ 0,367 2952270003101 Poker vibrator machine- hours 2,07 3410520001373 Truck crane, 5 ton-force (tf) machine- hours 0,517 32 CB03F Formwork from reusable plywood panels, 15 mm thick, for concreting columns in structures up to 20 m in height inclusive, excluding fastenings m² 27,00 9310060019920 Worker servicing ST man- hours 7,762 7124010010700 Carpenter man- hours 31,05 2874125881241 Standard washers M10 kg 0,216 2874115841033 Standard square nuts M10 pieces 1,35 2874115825003 Standard square bolts M10 × 140 mm pieces 1,35 2875276311528 Steel construction staples kg 1,35 2873145887000 Conical head nails, type A kg 1,08 2030122928385 Formwork panel with 15 mm plywood m² 4,05 2010102904340 Softwood planks m³ 0,027 2010102903495 Softwood boards m³ 0,041 2320187315789 Formwork release agent (Decofrol) kg 3,24 3410520006752 Truck crane, 6–10 tf machine- hours 0,621 33 RCsD02D 1 Rebar steel PC 52, diameter over 8 mm, fabricated in a site workshop for foundations and raft beams, installed in existing structural elements. For flat slabs, columns, beams, etc. kg 352,30 7123020011140 Rebar worker man- hours 34,842 9310060019920 Worker servicing ST man- hours 12,154 2710602000038 Plain rebar steel PC 52, diameter over 8 mm kg 361,107 2746133803142 Ordinary soft wire, diameter 1.25 mm kg 3,523 2010237318750 Spacers pieces 52,845 2922140006703 Window crane, capacity 0.0015 meganewtons (MN) (0.15 ton-force (tf)) machine- hours 14,18 34 CL18A Various metal products made of rolled profiles, sheet steel, checkered and reinforcing steel, and pipes for supports or coverings, fully or partially embedded in concrete / 80×80×15 State Standard (GOST) 103-76 kg 12,00 7214240021810 Construction locksmith (metal fitter) man- hours 2,622 9310060019920 Worker servicing ST man- hours 0,138
Стр. 11–13
mbedded
in concrete / 80×80×15 State Standard
(GOST) 103-76
kg 12,00
7214240021810 Construction locksmith (metal fitter) man-
hours
2,622
9310060019920 Worker servicing ST man-
hours
0,138
1 2 3 4 5
7212030022700 Welder man-
hours
0,138
2775276309886 Metal fabrications embedded in concrete kg 12,00
2734113803207 Soft black wire, diameter 2 mm kg 0,12
2873155901200 Welding electrodes kg 0,06
4011106202741 Electrical energy kw 0,096
1010126200341 Forge coal (hard coal) kg 0,18
35 IzD10A
Anticorrosion painting by brush of metal
products and structures, one coat of
anticorrosion primer based on red lead
and two coats of chlorinated rubber
enamel.
tonne 0,012
7141020013400 Industrial painter man-
hours
0,089
2430116100000 Chlorinated rubber enamel kg 0,094
2430226100814 Red lead primer G 355-6 kg 0,047
2430226109420 Thinner for anticorrosive varnishes D.006-1 NI
1708-61 A1
kg 0,007
2320166200676 White spirit kg 0,023
1711317306661 Cleaning cotton kg 0,012
36 CC13H
Splicing of rebar steel for reinforced
monolithic concrete by bench electric
welding, using one splice plate and butt
welding, for bars with diameter 18–28
mm
pieces 24,00
7212030022700 Welder man-
hours
15,18
2873155900800 Welding electrodes kg 14,40
4011106202741 Electrical energy kw 26,40
Total Monolithic columns
Cm-3 (2 pieces)
3.4. Monolithic columns Cm-4 (1 piece)
37 RCsB04D
Ready-mix concrete delivered from the
ready-mix concrete plant and placed by
conventional means in columns, beams,
ribs, slabs, landings, staircases, retaining
walls, reinforced concrete pads, floor
slabs, diaphragms, stair flights, etc., in
existing buildings / C20/25 (M350)
Small materials (boards, wire, nails, etc.) = 1,020
m³ 0,60
7123010010200 Concrete worker man-
hours
3,022
9310060019920 Worker servicing ST man-
hours
1,663
2663102100000
20
Concrete C20/25 m³ 0,627
4100116202818 Water for mortars and concrete m³ 0,073
2952270003101 Poker vibrator machine-
hours
0,414
1 2 3 4 5
3410520001373 Truck crane, 5 ton-force (tf) machine-
hours
0,103
38 CB03F
Formwork from reusable plywood panels,
15 mm thick, for concreting columns in
structures up to 20 m in height inclusive,
excluding fastenings
m² 4,00
9310060019920 Worker servicing ST man-
hours
1,15
7124010010700 Carpenter man-
hours
4,60
2874125881241 Standard washers M10 kg 0,032
2874115841033 Standard square nuts M10 pieces 0,20
2874115825003 Standard square bolts M10 × 140 mm pieces 0,20
2875276311528 Steel construction staples kg 0,20
2873145887000 Conical head nails, type A kg 0,16
2030122928385 Formwork panel with 15 mm plywood m² 0,60
2010102904340 Softwood planks m³ 0,004
2010102903495 Softwood boards m³ 0,006
2320187315789 Formwork release agent (Decofrol) kg 0,48
3410520006752 Truck crane, 6–10 tf machine-
hours
0,092
39 RCsD02D
1
Rebar steel PC 52, diameter ove
Стр. 13–14
102903495 Softwood boards m³ 0,006
2320187315789 Formwork release agent (Decofrol) kg 0,48
3410520006752 Truck crane, 6–10 tf machine-
hours
0,092
39 RCsD02D
1
Rebar steel PC 52, diameter over 8 mm,
fabricated in a site workshop for
foundations and raft beams, installed in
existing structural elements. For flat
slabs, columns, beams, etc.
kg 53,44
7123020011140 Rebar worker man-
hours
5,285
9310060019920 Worker servicing ST man-
hours
1,844
2710602000038 Plain rebar steel PC 52, diameter over 8 mm kg 54,776
2746133803142 Ordinary soft wire, diameter 1.25 mm kg 0,534
2010237318750 Spacers pieces 8,016
2922140006703 Window crane, capacity 0.0015 meganewtons
(MN) (0.15 ton-force (tf))
machine-
hours
2,151
40 CL18A
Various metal products made of rolled
profiles, sheet steel, checkered and
reinforcing steel, and pipes for supports
or coverings, fully or partially embedded
in concrete / 80×80×15 State Standard
(GOST) 103-76
kg 3,00
7214240021810 Construction locksmith (metal fitter) man-
hours
0,655
9310060019920 Worker servicing ST man-
hours
0,034
7212030022700 Welder man-
hours
0,034
2775276309886 Metal fabrications embedded in concrete kg 3,00
2734113803207 Soft black wire, diameter 2 mm kg 0,03
2873155901200 Welding electrodes kg 0,015
4011106202741 Electrical energy kw 0,024
1010126200341 Forge coal (hard coal) kg 0,045
1 2 3 4 5
41 IzD10A
Anticorrosion painting by brush of metal
products and structures, one coat of
anticorrosion primer based on red lead
and two coats of chlorinated rubber
enamel.
tonne 0,003
7141020013400 Industrial painter man-
hours
0,022
2430116100000 Chlorinated rubber enamel kg 0,023
2430226100814 Red lead primer G 355-6 kg 0,012
2430226109420 Thinner for anticorrosive varnishes D.006-1 NI
1708-61 A1
kg 0,002
2320166200676 White spirit kg 0,006
1711317306661 Cleaning cotton kg 0,003
42 CC13H
Splicing of rebar steel for reinforced
monolithic concrete by bench electric
welding, using one splice plate and butt
welding, for bars with diameter 18–28
mm
pieces 12,00
7212030022700 Welder man-
hours
7,59
2873155900800 Welding electrodes kg 7,20
4011106202741 Electrical energy kw 13,20
Total Monolithic columns
Cm-4 (1 piece)
3.5. Monolithic columns Cm-5 (1 piece)
43 RCsB04D
Ready-mix concrete delivered from the
ready-mix concrete plant and placed by
conventional means in columns, beams,
ribs, slabs, landings, staircases, retaining
walls, reinforced concrete pads, floor
slabs, diaphragms, stair flights, etc., in
existing buildings / C20/25 (M350)
Small materials (boards, wire, nails, etc.) = 1,020
m³ 0,32
7123010010200 Concrete worker man-
hours
1,612
9310060019920 Worker servicing ST man-
hours
0,887
2663102100000
20
Concrete C20/25 m³ 0,335
4100116202818 Water for mortars and concrete m³ 0,039
2952270003101 Poker vibrator machine-
hours
0,221
341
Стр. 14–15
0 Worker servicing ST man- hours 0,887 2663102100000 20 Concrete C20/25 m³ 0,335 4100116202818 Water for mortars and concrete m³ 0,039 2952270003101 Poker vibrator machine- hours 0,221 3410520001373 Truck crane, 5 ton-force (tf) machine- hours 0,055 44 CB03F Formwork from reusable plywood panels, 15 mm thick, for concreting columns in structures up to 20 m in height inclusive, excluding fastenings m² 2,50 1 2 3 4 5 9310060019920 Worker servicing ST man- hours 0,719 7124010010700 Carpenter man- hours 2,875 2874125881241 Standard washers M10 kg 0,02 2874115841033 Standard square nuts M10 pieces 0,125 2874115825003 Standard square bolts M10 × 140 mm pieces 0,125 2875276311528 Steel construction staples kg 0,125 2873145887000 Conical head nails, type A kg 0,10 2030122928385 Formwork panel with 15 mm plywood m² 0,375 2010102904340 Softwood planks m³ 0,003 2010102903495 Softwood boards m³ 0,004 2320187315789 Formwork release agent (Decofrol) kg 0,30 3410520006752 Truck crane, 6–10 tf machine- hours 0,057 45 RCsD02D 1 Rebar steel PC 52, diameter over 8 mm, fabricated in a site workshop for foundations and raft beams, installed in existing structural elements. For flat slabs, columns, beams, etc. kg 28,60 7123020011140 Rebar worker man- hours 2,829 9310060019920 Worker servicing ST man- hours 0,987 2710602000038 Plain rebar steel PC 52, diameter over 8 mm kg 29,315 2746133803142 Ordinary soft wire, diameter 1.25 mm kg 0,286 2010237318750 Spacers pieces 4,29 2922140006703 Window crane, capacity 0.0015 meganewtons (MN) (0.15 ton-force (tf)) machine- hours 1,151 46 CL18A Various metal products made of rolled profiles, sheet steel, checkered and reinforcing steel, and pipes for supports or coverings, fully or partially embedded in concrete / 80×80×15 State Standard (GOST) 103-76 kg 3,00 7214240021810 Construction locksmith (metal fitter) man- hours 0,655 9310060019920 Worker servicing ST man- hours 0,034 7212030022700 Welder man- hours 0,034 2775276309886 Metal fabrications embedded in concrete kg 3,00 2734113803207 Soft black wire, diameter 2 mm kg 0,03 2873155901200 Welding electrodes kg 0,015 4011106202741 Electrical energy kw 0,024 1010126200341 Forge coal (hard coal) kg 0,045 47 IzD10A Anticorrosion painting by brush of metal products and structures, one coat of anticorrosion primer based on red lead and two coats of chlorinated rubber enamel. tonne 0,003
Стр. 15–17
g 0,045
47 IzD10A
Anticorrosion painting by brush of metal
products and structures, one coat of
anticorrosion primer based on red lead
and two coats of chlorinated rubber
enamel.
tonne 0,003
1 2 3 4 5
7141020013400 Industrial painter man-
hours
0,022
2430116100000 Chlorinated rubber enamel kg 0,023
2430226100814 Red lead primer G 355-6 kg 0,012
2430226109420 Thinner for anticorrosive varnishes D.006-1 NI
1708-61 A1
kg 0,002
2320166200676 White spirit kg 0,006
1711317306661 Cleaning cotton kg 0,003
48 CC13H
Splicing of rebar steel for reinforced
monolithic concrete by bench electric
welding, using one splice plate and butt
welding, for bars with diameter 18–28
mm
pieces 12,00
7212030022700 Welder man-
hours
7,59
2873155900800 Welding electrodes kg 7,20
4011106202741 Electrical energy kw 13,20
Total Monolithic columns
Cm-5 (1 piece)
Total Columns
4. Beams
4.1. Stair beam Gr-1 (2 pieces)
49 RCsB04D
Ready-mix concrete delivered from the
ready-mix concrete plant and placed by
conventional means in columns, beams,
ribs, slabs, landings, staircases, retaining
walls, reinforced concrete pads, floor
slabs, diaphragms, stair flights, etc., in
existing buildings / C20/25 (M350)
Small materials (boards, wire, nails, etc.) = 1,020
m³ 3,48
7123010010200 Concrete worker man-
hours
17,529
9310060019920 Worker servicing ST man-
hours
9,645
2663102100000
20
Concrete C20/25 m³ 3,638
4100116202818 Water for mortars and concrete m³ 0,426
2952270003101 Poker vibrator machine-
hours
2,401
3410520001373 Truck crane, 5 ton-force (tf) machine-
hours
0,60
50 CB03E
Formwork from reusable plywood panels,
15 mm thick, for concreting slabs and
beams in structures up to 20 m in height
inclusive, excluding fastenings
m² 3,00
9310060019920 Worker servicing ST man- 0,517
1 2 3 4 5
hours
7124010010700 Carpenter man-
hours
2,932
2874125881241 Standard washers M10 kg 0,015
2874115841033 Standard square nuts M10 pieces 0,90
2874115825003 Standard square bolts M10 × 140 mm pieces 0,90
2875276311528 Steel construction staples kg 0,09
2873145887000 Conical head nails, type A kg 0,09
2030122928385 Formwork panel with 15 mm plywood m² 0,39
2010102904340 Softwood planks m³ 0,003
2010102903495 Softwood boards m³ 0,003
2320187315789 Formwork release agent (Decofrol) kg 0,36
3410520006752 Truck crane, 6–10 tf machine-
hours
0,069
51 CB11A
Supports with inventory adjustable props
for installation of prefabricated slabs,
with placement of partially or fully
monolithic slabs with beams or
monolithic beams with prefabricated
slabs type PE 3100 R
pieces 15,00
7124010010700
1
Carpenter man-
hours
5,175
9310060019920 Worker servicing ST man-
hours
2,587
2811236310185 Metal adjustable props PE 3100 R kg 6,00
2010102904340 Softwood planks m³ 0,007
2922140007000 Crane machi
Стр. 17–18
r man-
hours
5,175
9310060019920 Worker servicing ST man-
hours
2,587
2811236310185 Metal adjustable props PE 3100 R kg 6,00
2010102904340 Softwood planks m³ 0,007
2922140007000 Crane machine-
hours
0,172
52 RCsD02D
1
Rebar steel PC 52, diameter over 8 mm,
fabricated in a site workshop for
foundations and raft beams, installed in
existing structural elements. For flat
slabs, columns, beams, etc.
kg 97,04
7123020011140 Rebar worker man-
hours
9,597
9310060019920 Worker servicing ST man-
hours
3,348
2710602000038 Plain rebar steel PC 52, diameter over 8 mm kg 99,466
2746133803142 Ordinary soft wire, diameter 1.25 mm kg 0,97
2010237318750 Spacers pieces 14,556
2922140006703 Window crane, capacity 0.0015 meganewtons
(MN) (0.15 ton-force (tf))
machine-
hours
3,906
Total Stair beam Gr-1 (2
pieces)
4.2. Stair beam Gr-2 (1 piece)
53 RCsB04D
Ready-mix concrete delivered from the
ready-mix concrete plant and placed by
conventional means in columns, beams,
ribs, slabs, landings, staircases, retaining
walls, reinforced concrete pads, floor
m³ 0,61
1 2 3 4 5
slabs, diaphragms, stair flights, etc., in
existing buildings / C20/25 (M350)
Small materials (boards, wire, nails, etc.) = 1,020
7123010010200 Concrete worker man-
hours
3,073
9310060019920 Worker servicing ST man-
hours
1,691
2663102100000
20
Concrete C20/25 m³ 0,638
4100116202818 Water for mortars and concrete m³ 0,075
2952270003101 Poker vibrator machine-
hours
0,421
3410520001373 Truck crane, 5 ton-force (tf) machine-
hours
0,105
54 CB03E
Formwork from reusable plywood panels,
15 mm thick, for concreting slabs and
beams in structures up to 20 m in height
inclusive, excluding fastenings
m² 1,50
9310060019920 Worker servicing ST man-
hours
0,259
7124010010700 Carpenter man-
hours
1,466
2874125881241 Standard washers M10 kg 0,007
2874115841033 Standard square nuts M10 pieces 0,45
2874115825003 Standard square bolts M10 × 140 mm pieces 0,45
2875276311528 Steel construction staples kg 0,045
2873145887000 Conical head nails, type A kg 0,045
2030122928385 Formwork panel with 15 mm plywood m² 0,195
2010102904340 Softwood planks m³ 0,002
2010102903495 Softwood boards m³ 0,002
2320187315789 Formwork release agent (Decofrol) kg 0,18
3410520006752 Truck crane, 6–10 tf machine-
hours
0,034
55 CB11A
Supports with inventory adjustable props
for installation of prefabricated slabs,
with placement of partially or fully
monolithic slabs with beams or
monolithic beams with prefabricated
slabs type PE 3100 R
pieces 7,00
7124010010700
1
Carpenter man-
hours
2,415
9310060019920 Worker servicing ST man-
hours
1,207
2811236310185 Metal adjustable props PE 3100 R kg 2,80
2010102904340 Softwood planks m³ 0,004
2922140007000 Crane machine-
hours
0,081
56 RCsD02D
1
Rebar steel PC 52, diameter over 8 mm,
fabricated in a site workshop for
Стр. 18–20
ops PE 3100 R kg 2,80
2010102904340 Softwood planks m³ 0,004
2922140007000 Crane machine-
hours
0,081
56 RCsD02D
1
Rebar steel PC 52, diameter over 8 mm,
fabricated in a site workshop for
foundations and raft beams, installed in
existing structural elements. For flat
slabs, columns, beams, etc.
kg 78,00
1 2 3 4 5
7123020011140 Rebar worker man-
hours
7,714
9310060019920 Worker servicing ST man-
hours
2,691
2710602000038 Plain rebar steel PC 52, diameter over 8 mm kg 79,95
2746133803142 Ordinary soft wire, diameter 1.25 mm kg 0,78
2010237318750 Spacers pieces 11,70
2922140006703 Window crane, capacity 0.0015 meganewtons
(MN) (0.15 ton-force (tf))
machine-
hours
3,139
57 CL18A
Various metal products made of rolled
profiles, sheet steel, checkered and
reinforcing steel, and pipes for supports
or coverings, fully or partially embedded
in concrete / 80×80×15 State Standard
(GOST) 103-76
kg 2,25
7214240021810 Construction locksmith (metal fitter) man-
hours
0,492
9310060019920 Worker servicing ST man-
hours
0,026
7212030022700 Welder man-
hours
0,026
2775276309886 Metal fabrications embedded in concrete kg 2,25
2734113803207 Soft black wire, diameter 2 mm kg 0,022
2873155901200 Welding electrodes kg 0,011
4011106202741 Electrical energy kw 0,018
1010126200341 Forge coal (hard coal) kg 0,034
Total Stair beam Gr-2 (1
piece)
4.3. Beams at elevation 3.500
58 RCsB04D
Ready-mix concrete delivered from the
ready-mix concrete plant and placed by
conventional means in columns, beams,
ribs, slabs, landings, staircases, retaining
walls, reinforced concrete pads, floor
slabs, diaphragms, stair flights, etc., in
existing buildings / C20/25 (M350)
Small materials (boards, wire, nails, etc.) = 1,020
m³ 91,00
7123010010200 Concrete worker man-
hours
458,367
9310060019920 Worker servicing ST man-
hours
252,207
2663102100000
20
Concrete C20/25 m³ 95,14
4100116202818 Water for mortars and concrete m³ 11,138
2952270003101 Poker vibrator machine-
hours
62,79
3410520001373 Truck crane, 5 ton-force (tf) machine-
hours
15,697
59 CB03E Formwork from reusable plywood panels, m² 536,00
1 2 3 4 5
15 mm thick, for concreting slabs and
beams in structures up to 20 m in height
inclusive, excluding fastenings
9310060019920 Worker servicing ST man-
hours
92,46
7124010010700 Carpenter man-
hours
523,94
2874125881241 Standard washers M10 kg 2,68
2874115841033 Standard square nuts M10 pieces 160,80
2874115825003 Standard square bolts M10 × 140 mm pieces 160,80
2875276311528 Steel construction staples kg 16,08
2873145887000 Conical head nails, type A kg 16,08
2030122928385 Formwork panel with 15 mm plywood m² 69,68
2010102904340 Softwood planks m³ 0,536
2010102903495 Softwood boards m³ 0,536
2320187315789 Formwork release agent (Decofrol) kg 64,32
3410520006752 Truck crane, 6–10 tf machine-
hours
12,328
60 CB
Стр. 20–21
02904340 Softwood planks m³ 0,536 2010102903495 Softwood boards m³ 0,536 2320187315789 Formwork release agent (Decofrol) kg 64,32 3410520006752 Truck crane, 6–10 tf machine- hours 12,328 60 CB11A Supports with inventory adjustable props for installation of prefabricated slabs, with placement of partially or fully monolithic slabs with beams or monolithic beams with prefabricated slabs type PE 3100 R pieces 830,00 7124010010700 1 Carpenter man- hours 286,35 9310060019920 Worker servicing ST man- hours 143,175 2811236310185 Metal adjustable props PE 3100 R kg 332,00 2010102904340 Softwood planks m³ 0,415 2922140007000 Crane machine- hours 9,545 61 RCsD01D Rebar steel OB 37, diameter up to 8 mm inclusive, fabricated in a site workshop for foundations and raft beams, installed in existing structural elements. Fabrication of reinforcement for flat slabs, columns, beams, etc. kg 98,00 7123020011140 Rebar worker man- hours 9,016 9310060019920 Worker servicing ST man- hours 3,381 2710602000030 Plain rebar steel OB 37 STAS 438 diameter 6 mm kg 100,45 2746133803142 Ordinary soft wire, diameter 1.25 mm kg 0,98 2010237318750 Spacers pieces 14,70 2952270004203 Electric rebar cutting machine, for bar diameter up to 40 mm machine- hours 0,316 2940340004205 Rebar bending machine machine- hours 0,394 2922140006703 Window crane, capacity 0.0015 meganewtons (MN) (0.15 ton-force (tf)) machine- hours 3,945 2952270006612 Rebar tensioning winch OB machine- 0,282 1 2 3 4 5 hours 62 RCsD02D 1 Rebar steel PC 52, diameter over 8 mm, fabricated in a site workshop for foundations and raft beams, installed in existing structural elements. For flat slabs, columns, beams, etc. kg 12 547,70 7123020011140 Rebar worker man- hours 1 240,968 9310060019920 Worker servicing ST man- hours 432,896 2710602000038 Plain rebar steel PC 52, diameter over 8 mm kg 12 861,392 2746133803142 Ordinary soft wire, diameter 1.25 mm kg 125,477 2010237318750 Spacers pieces 1 882,155 2922140006703 Window crane, capacity 0.0015 meganewtons (MN) (0.15 ton-force (tf)) machine- hours 505,045 63 CL18A Various metal products made of rolled profiles, sheet steel, checkered and reinforcing steel, and pipes for supports or coverings, fully or partially embedded in concrete / 80×80×15 State Standard (GOST) 103-76 kg 51,90 7214240021810 Construction locksmith (metal fitter) man- hours 11,34 9310060019920 Worker servicing ST man- hours 0,597 7212030022700 Welder man- hours 0,597 2775276309886 Metal fabrications embedded in concrete kg 51,90 2734113803207 Soft black wire, diameter 2 mm kg 0,519 2873155901200 Welding electrodes kg 0,26 4011106202741 Electrical energy kw 0,415 1010126200341 Forge coal (hard coal) kg 0,778 64 CC13H Splicing of rebar steel for reinforced monolithic concrete by bench electric welding, using one splice plate and butt welding, for bars with diam
Стр. 21–22
200341 Forge coal (hard coal) kg 0,778
64 CC13H
Splicing of rebar steel for reinforced
monolithic concrete by bench electric
welding, using one splice plate and butt
welding, for bars with diameter 18–28
mm
pieces 48,00
7212030022700 Welder man-
hours
30,36
2873155900800 Welding electrodes kg 28,80
4011106202741 Electrical energy kw 52,80
Total Beams at elevation
3.500
4.4. Beams at elevation 7.100
65 RCsB04D
Ready-mix concrete delivered from the
ready-mix concrete plant and placed by
conventional means in columns, beams,
ribs, slabs, landings, staircases, retaining
m³ 41,00
1 2 3 4 5
walls, reinforced concrete pads, floor
slabs, diaphragms, stair flights, etc., in
existing buildings / C20/25 (M350)
Small materials (boards, wire, nails, etc.) = 1,020
7123010010200 Concrete worker man-
hours
206,517
9310060019920 Worker servicing ST man-
hours
113,632
2663102100000
20
Concrete C20/25 m³ 42,865
4100116202818 Water for mortars and concrete m³ 5,018
2952270003101 Poker vibrator machine-
hours
28,29
3410520001373 Truck crane, 5 ton-force (tf) machine-
hours
7,072
66 CB03E
Formwork from reusable plywood panels,
15 mm thick, for concreting slabs and
beams in structures up to 20 m in height
inclusive, excluding fastenings
m² 331,00
9310060019920 Worker servicing ST man-
hours
57,097
7124010010700 Carpenter man-
hours
323,552
2874125881241 Standard washers M10 kg 1,655
2874115841033 Standard square nuts M10 pieces 99,30
2874115825003 Standard square bolts M10 × 140 mm pieces 99,30
2875276311528 Steel construction staples kg 9,93
2873145887000 Conical head nails, type A kg 9,93
2030122928385 Formwork panel with 15 mm plywood m² 43,03
2010102904340 Softwood planks m³ 0,331
2010102903495 Softwood boards m³ 0,331
2320187315789 Formwork release agent (Decofrol) kg 39,72
3410520006752 Truck crane, 6–10 tf machine-
hours
7,613
67 CB11A
Supports with inventory adjustable props
for installation of prefabricated slabs,
with placement of partially or fully
monolithic slabs with beams or
monolithic beams with prefabricated
slabs type PE 3100 R
pieces 700,00
7124010010700
1
Carpenter man-
hours
241,50
9310060019920 Worker servicing ST man-
hours
120,75
2811236310185 Metal adjustable props PE 3100 R kg 280,00
2010102904340 Softwood planks m³ 0,35
2922140007000 Crane machine-
hours
8,05
68 RCsD02D
1
Rebar steel PC 52, diameter over 8 mm,
fabricated in a site workshop for
foundations and raft beams, installed in
existing structural elements. For flat
kg 6 649,30
Стр. 22–24
e-
hours
8,05
68 RCsD02D
1
Rebar steel PC 52, diameter over 8 mm,
fabricated in a site workshop for
foundations and raft beams, installed in
existing structural elements. For flat
kg 6 649,30
1 2 3 4 5
slabs, columns, beams, etc.
7123020011140 Rebar worker man-
hours
657,616
9310060019920 Worker servicing ST man-
hours
229,401
2710602000038 Plain rebar steel PC 52, diameter over 8 mm kg 6 815,532
2746133803142 Ordinary soft wire, diameter 1.25 mm kg 66,493
2010237318750 Spacers pieces 997,395
2922140006703 Window crane, capacity 0.0015 meganewtons
(MN) (0.15 ton-force (tf))
machine-
hours
267,634
69 CL18A
Various metal products made of rolled
profiles, sheet steel, checkered and
reinforcing steel, and pipes for supports
or coverings, fully or partially embedded
in concrete / 80×80×15 State Standard
(GOST) 103-76
kg 1 314,80
7214240021810 Construction locksmith (metal fitter) man-
hours
287,284
9310060019920 Worker servicing ST man-
hours
15,12
7212030022700 Welder man-
hours
15,12
2775276309886 Metal fabrications embedded in concrete kg 1 314,80
2734113803207 Soft black wire, diameter 2 mm kg 13,148
2873155901200 Welding electrodes kg 6,574
4011106202741 Electrical energy kw 10,518
1010126200341 Forge coal (hard coal) kg 19,722
70 IzD10A
Anticorrosion painting by brush of metal
products and structures, one coat of
anticorrosion primer based on red lead
and two coats of chlorinated rubber
enamel.
tonne 1,30
7141020013400 Industrial painter man-
hours
9,628
2430116100000 Chlorinated rubber enamel kg 10,14
2430226100814 Red lead primer G 355-6 kg 5,07
2430226109420 Thinner for anticorrosive varnishes D.006-1 NI
1708-61 A1
kg 0,715
2320166200676 White spirit kg 2,535
1711317306661 Cleaning cotton kg 1,268
71 CC13H
Splicing of rebar steel for reinforced
monolithic concrete by bench electric
welding, using one splice plate and butt
welding, for bars with diameter 18–28
mm
pieces 24,00
7212030022700 Welder man-
hours
15,18
2873155900800 Welding electrodes kg 14,40
4011106202741 Electrical energy kw 26,40
1 2 3 4 5
Total Beams at elevation
7.100
Total Beams
5. Slab
5.1. Slab at elevation 3.500
72 RCsB04D
Ready-mix concrete delivered from the
ready-mix concrete plant and placed by
conventional means in columns, beams,
ribs, slabs, landings, staircases, retaining
walls, reinforced concrete pads, floor
slabs, diaphragms, stair flights, etc., in
existing buildings / C20/25 (M350)
Small materials (boards, wire, nails, etc.) = 1,020
m³ 150,20
7123010010200 Concrete worker man-
hours
756,557
9310060019920 Worker servicing ST man-
hours
416,279
2663102100000
20
Concrete C20/25 m³ 157,034
4100116202818 Water for mortars and concrete m³ 18,384
2952270003101 Poker vibrator machine-
hours
103,638
3410520001373 Truck crane, 5 ton-force (tf) machine-
hours
Стр. 24–25
oncrete C20/25 m³ 157,034
4100116202818 Water for mortars and concrete m³ 18,384
2952270003101 Poker vibrator machine-
hours
103,638
3410520001373 Truck crane, 5 ton-force (tf) machine-
hours
25,909
73 CB03E
Formwork from reusable plywood panels,
15 mm thick, for concreting slabs and
beams in structures up to 20 m in height
inclusive, excluding fastenings
m² 835,00
9310060019920 Worker servicing ST man-
hours
144,037
7124010010700 Carpenter man-
hours
816,212
2874125881241 Standard washers M10 kg 4,175
2874115841033 Standard square nuts M10 pieces 250,50
2874115825003 Standard square bolts M10 × 140 mm pieces 250,50
2875276311528 Steel construction staples kg 25,05
2873145887000 Conical head nails, type A kg 25,05
2030122928385 Formwork panel with 15 mm plywood m² 108,55
2010102904340 Softwood planks m³ 0,835
2010102903495 Softwood boards m³ 0,835
2320187315789 Formwork release agent (Decofrol) kg 100,20
3410520006752 Truck crane, 6–10 tf machine-
hours
19,205
74 CB11A
Supports with inventory adjustable props
for installation of prefabricated slabs,
with placement of partially or fully
monolithic slabs with beams or
monolithic beams with prefabricated
slabs type PE 3100 R
pieces 1 670,00
1 2 3 4 5
7124010010700
1
Carpenter man-
hours
576,15
9310060019920 Worker servicing ST man-
hours
288,075
2811236310185 Metal adjustable props PE 3100 R kg 668,00
2010102904340 Softwood planks m³ 0,835
2922140007000 Crane machine-
hours
19,205
75 RCsD02D
Rebar steel OB 37, with diameter over 8
mm, fabricated in a site workshop for
foundations and raft beams, installed in
existing structural elements. For flat
slabs, columns, beams, etc.
kg 808,42
7123020011140 Rebar worker man-
hours
72,515
9310060019920 Worker servicing ST man-
hours
27,89
2710602000035 Plain rebar steel OB 37, diameter over 8 mm kg 828,63
2746133803142 Ordinary soft wire, diameter 1.25 mm kg 8,084
2010237318750 Spacers pieces 121,263
2922140006703 Window crane, capacity 0.0015 meganewtons
(MN) (0.15 ton-force (tf))
machine-
hours
32,539
76 RCsD02D
1
Rebar steel PC 52, diameter over 8 mm,
fabricated in a site workshop for
foundations and raft beams, installed in
existing structural elements. For flat
slabs, columns, beams, etc.
kg 17 068,37
7123020011140 Rebar worker man-
hours
1 688,062
9310060019920 Worker servicing ST man-
hours
588,859
2710602000038 Plain rebar steel PC 52, diameter over 8 mm kg 17 495,079
2746133803142 Ordinary soft wire, diameter 1.25 mm kg 170,684
2010237318750 Spacers pieces 2 560,255
2922140006703 Window crane, capacity 0.0015 meganewtons
(MN) (0.15 ton-force (tf))
machine-
hours
687,002
Total Slab at elevation
3.500
5.2. Slab at elevation 7.100
77 RCsB04D
Ready-mix concrete delivered from the
ready-mix concrete plant and placed by
conventional means in columns, beams,
ribs, slabs, l
Стр. 25–27
5.2. Slab at elevation 7.100 77 RCsB04D Ready-mix concrete delivered from the ready-mix concrete plant and placed by conventional means in columns, beams, ribs, slabs, landings, staircases, retaining walls, reinforced concrete pads, floor slabs, diaphragms, stair flights, etc., in existing buildings / C20/25 (M350) Small materials (boards, wire, nails, etc.) = 1,020 m³ 6,50 1 2 3 4 5 7123010010200 Concrete worker man- hours 32,74 9310060019920 Worker servicing ST man- hours 18,015 2663102100000 20 Concrete C20/25 m³ 6,796 4100116202818 Water for mortars and concrete m³ 0,796 2952270003101 Poker vibrator machine- hours 4,485 3410520001373 Truck crane, 5 ton-force (tf) machine- hours 1,121 78 CB03E Formwork from reusable plywood panels, 15 mm thick, for concreting slabs and beams in structures up to 20 m in height inclusive, excluding fastenings m² 36,00 9310060019920 Worker servicing ST man- hours 6,21 7124010010700 Carpenter man- hours 35,19 2874125881241 Standard washers M10 kg 0,18 2874115841033 Standard square nuts M10 pieces 10,80 2874115825003 Standard square bolts M10 × 140 mm pieces 10,80 2875276311528 Steel construction staples kg 1,08 2873145887000 Conical head nails, type A kg 1,08 2030122928385 Formwork panel with 15 mm plywood m² 4,68 2010102904340 Softwood planks m³ 0,036 2010102903495 Softwood boards m³ 0,036 2320187315789 Formwork release agent (Decofrol) kg 4,32 3410520006752 Truck crane, 6–10 tf machine- hours 0,828 79 CB11A Supports with inventory adjustable props for installation of prefabricated slabs, with placement of partially or fully monolithic slabs with beams or monolithic beams with prefabricated slabs type PE 3100 R pieces 75,00 7124010010700 1 Carpenter man- hours 25,875 9310060019920 Worker servicing ST man- hours 12,937 2811236310185 Metal adjustable props PE 3100 R kg 30,00 2010102904340 Softwood planks m³ 0,037 2922140007000 Crane machine- hours 0,862 80 RCsD02D Rebar steel OB 37, with diameter over 8 mm, fabricated in a site workshop for foundations and raft beams, installed in existing structural elements. For flat slabs, columns, beams, etc. kg 36,30 7123020011140 Rebar worker man- hours 3,256 9310060019920 Worker servicing ST man- 1,252 1 2 3 4 5 hours 2710602000035 Plain rebar steel OB 37, diameter over 8 mm kg 37,207 2746133803142 Ordinary soft wire, diameter 1.25 mm kg 0,363 2010237318750 Spacers pieces 5,445 2922140006703 Window crane, capacity 0.0015 meganewtons (MN) (0.15 ton-force (tf)) machine- hours 1,461 81 RCsD02D 1 Rebar steel PC 52, diameter over 8 mm, fabricated in a site workshop for foundations and raft beams, installed in existing structural elements. For flat slabs, columns, beams, etc. kg 634,03 7123020011140 Rebar worker man- hours 62,706 9310060019920 Worker servicing ST man- hours 21,874 2710602000038 Plain rebar s
Стр. 27–28
tural elements. For flat
slabs, columns, beams, etc.
kg 634,03
7123020011140 Rebar worker man-
hours
62,706
9310060019920 Worker servicing ST man-
hours
21,874
2710602000038 Plain rebar steel PC 52, diameter over 8 mm kg 649,881
2746133803142 Ordinary soft wire, diameter 1.25 mm kg 6,34
2010237318750 Spacers pieces 95,104
2922140006703 Window crane, capacity 0.0015 meganewtons
(MN) (0.15 ton-force (tf))
machine-
hours
25,52
Total Slab at elevation
7.100
5.3. Interior staircase SC-1
82 RCsB04D
Ready-mix concrete delivered from the
ready-mix concrete plant and placed by
conventional means in columns, beams,
ribs, slabs, landings, staircases, retaining
walls, reinforced concrete pads, floor
slabs, diaphragms, stair flights, etc., in
existing buildings / C20/25 (M350)
Small materials (boards, wire, nails, etc.) = 1,020
m³ 3,20
7123010010200 Concrete worker man-
hours
16,118
9310060019920 Worker servicing ST man-
hours
8,869
2663102100000
20
Concrete C20/25 m³ 3,346
4100116202818 Water for mortars and concrete m³ 0,392
2952270003101 Poker vibrator machine-
hours
2,208
3410520001373 Truck crane, 5 ton-force (tf) machine-
hours
0,552
83 CB03E
Formwork from reusable plywood panels,
15 mm thick, for concreting slabs and
beams in structures up to 20 m in height
inclusive, excluding fastenings
m² 12,00
9310060019920 Worker servicing ST man-
hours
2,07
7124010010700 Carpenter man- 11,73
1 2 3 4 5
hours
2874125881241 Standard washers M10 kg 0,06
2874115841033 Standard square nuts M10 pieces 3,60
2874115825003 Standard square bolts M10 × 140 mm pieces 3,60
2875276311528 Steel construction staples kg 0,36
2873145887000 Conical head nails, type A kg 0,36
2030122928385 Formwork panel with 15 mm plywood m² 1,56
2010102904340 Softwood planks m³ 0,012
2010102903495 Softwood boards m³ 0,012
2320187315789 Formwork release agent (Decofrol) kg 1,44
3410520006752 Truck crane, 6–10 tf machine-
hours
0,276
84 RCsD02D
Rebar steel OB 37, with diameter over 8
mm, fabricated in a site workshop for
foundations and raft beams, installed in
existing structural elements. For flat
slabs, columns, beams, etc.
kg 108,00
7123020011140 Rebar worker man-
hours
9,688
9310060019920 Worker servicing ST man-
hours
3,726
2710602000035 Plain rebar steel OB 37, diameter over 8 mm kg 110,70
2746133803142 Ordinary soft wire, diameter 1.25 mm kg 1,08
2010237318750 Spacers pieces 16,20
2922140006703 Window crane, capacity 0.0015 meganewtons
(MN) (0.15 ton-force (tf))
machine-
hours
4,347
85 RCsD02D
1
Rebar steel PC 52, diameter over 8 mm,
fabricated in a site workshop for
foundations and raft beams, installed in
existing structural elements. For flat
slabs, columns, beams, etc.
kg 307,00
7123020011140 Rebar worker man-
hours
30,362
9310060019920 Worker servicing ST man-
hours
10,591
2710602000038 Plain rebar ste
Стр. 28–29
ral elements. For flat
slabs, columns, beams, etc.
kg 307,00
7123020011140 Rebar worker man-
hours
30,362
9310060019920 Worker servicing ST man-
hours
10,591
2710602000038 Plain rebar steel PC 52, diameter over 8 mm kg 314,675
2746133803142 Ordinary soft wire, diameter 1.25 mm kg 3,07
2010237318750 Spacers pieces 46,05
2922140006703 Window crane, capacity 0.0015 meganewtons
(MN) (0.15 ton-force (tf))
machine-
hours
12,357
Total Interior staircase
SC-1
5.4. Interior staircase SC-2
86 RCsB04D
Ready-mix concrete delivered from the
ready-mix concrete plant and placed by
conventional means in columns, beams,
ribs, slabs, landings, staircases, retaining
walls, reinforced concrete pads, floor
slabs, diaphragms, stair flights, etc., in
existing buildings / C20/25 (M350)
m³ 3,20
1 2 3 4 5
Small materials (boards, wire, nails, etc.) = 1,020
7123010010200 Concrete worker man-
hours
16,118
9310060019920 Worker servicing ST man-
hours
8,869
2663102100000
20
Concrete C20/25 m³ 3,346
4100116202818 Water for mortars and concrete m³ 0,392
2952270003101 Poker vibrator machine-
hours
2,208
3410520001373 Truck crane, 5 ton-force (tf) machine-
hours
0,552
87 CB03E
Formwork from reusable plywood panels,
15 mm thick, for concreting slabs and
beams in structures up to 20 m in height
inclusive, excluding fastenings
m² 12,00
9310060019920 Worker servicing ST man-
hours
2,07
7124010010700 Carpenter man-
hours
11,73
2874125881241 Standard washers M10 kg 0,06
2874115841033 Standard square nuts M10 pieces 3,60
2874115825003 Standard square bolts M10 × 140 mm pieces 3,60
2875276311528 Steel construction staples kg 0,36
2873145887000 Conical head nails, type A kg 0,36
2030122928385 Formwork panel with 15 mm plywood m² 1,56
2010102904340 Softwood planks m³ 0,012
2010102903495 Softwood boards m³ 0,012
2320187315789 Formwork release agent (Decofrol) kg 1,44
3410520006752 Truck crane, 6–10 tf machine-
hours
0,276
88 RCsD02D
Rebar steel OB 37, with diameter over 8
mm, fabricated in a site workshop for
foundations and raft beams, installed in
existing structural elements. For flat
slabs, columns, beams, etc.
kg 108,00
7123020011140 Rebar worker man-
hours
9,688
9310060019920 Worker servicing ST man-
hours
3,726
2710602000035 Plain rebar steel OB 37, diameter over 8 mm kg 110,70
2746133803142 Ordinary soft wire, diameter 1.25 mm kg 1,08
2010237318750 Spacers pieces 16,20
2922140006703 Window crane, capacity 0.0015 meganewtons
(MN) (0.15 ton-force (tf))
machine-
hours
4,347
89 RCsD02D
1
Rebar steel PC 52, diameter over 8 mm,
fabricated in a site workshop for
foundations and raft beams, installed in
existing structural elements. For flat
slabs, columns, beams, etc.
kg 307,00
7123020011140 Rebar worker man- 30,362
Стр. 29–31
fabricated in a site workshop for
foundations and raft beams, installed in
existing structural elements. For flat
slabs, columns, beams, etc.
kg 307,00
7123020011140 Rebar worker man- 30,362
1 2 3 4 5
hours
9310060019920 Worker servicing ST man-
hours
10,591
2710602000038 Plain rebar steel PC 52, diameter over 8 mm kg 314,675
2746133803142 Ordinary soft wire, diameter 1.25 mm kg 3,07
2010237318750 Spacers pieces 46,05
2922140006703 Window crane, capacity 0.0015 meganewtons
(MN) (0.15 ton-force (tf))
machine-
hours
12,357
Total Interior staircase
SC-2
5.5. Floors at elevation 0.000
90 TsC54B
Base layer of rubble stone
m³ 191,00
9310060019900 Unskilled worker man-
hours
217,453
1411122201752 Crushed stone m³ 219,65
4100126202818 Water m³ 19,10
2912340002506
Mobile compressor with internal combustion
engine, pressure up to 686 kilopascals (kPa) (7
atmospheres (atm)), capacity 2.2 m³/min
machine-
hours
46,126
2592270004021 Pneumatic or mechanical compactor, 150–200 kg machine-
hours
92,253
91 CA02C
Plain concrete cast for leveling layers,
slopes and screeds at heights up to 35 m
inclusive, prepared by concrete batching
plant or ready-mix concrete, placed by
conventional means, class C8/10
Small materials (softwood planks) = 1,010
m³ 8,60
7123010010200 Concrete worker man-
hours
38,076
9310060019920 Worker servicing ST man-
hours
6,428
2663102100000
150
Concrete C8/10 m³ 8,903
4100116202818 Water for mortars and concrete m³ 0,869
2922140007000 Crane machine-
hours
2,472
2952270003000 Surface vibrator machine-
hours
3,956
92 RCsB04D
Ready-mix concrete delivered from the
ready-mix concrete plant and placed by
conventional means in columns, beams,
ribs, slabs, landings, staircases, retaining
walls, reinforced concrete pads, floor
slabs, diaphragms, stair flights, etc., in
existing buildings / C20/25 (M350)
Small materials (boards, wire, nails, etc.) = 1,020
m³ 298,00
7123010010200 Concrete worker man-
hours
1 501,026
9310060019920 Worker servicing ST man-
hours
825,907
1 2 3 4 5
2663102100000
20
Concrete C20/25 m³ 311,559
4100116202818 Water for mortars and concrete m³ 36,475
2952270003101 Poker vibrator machine-
hours
205,62
3410520001373 Truck crane, 5 ton-force (tf) machine-
hours
51,405
93 RCsD02D
Rebar steel OB 37, with diameter over 8
mm, fabricated in a site workshop for
foundations and raft beams, installed in
existing structural elements. For flat
slabs, columns, beams, etc.
kg 826,10
7123020011140 Rebar worker man-
hours
74,101
9310060019920 Worker servicing ST man-
hours
28,50
2710602000035 Plain rebar steel OB 37, diameter over 8 mm kg 846,752
2746133803142 Ordinary soft wire, diameter 1.25 mm kg 8,261
2010237318750 Spacers pieces 123,915
2922140006703 Window crane, capacity 0.0015 meganewtons
(MN) (0.15 ton-force (tf))
machine-
hours
33,251
94 RCsD02D
1
Стр. 31–32
soft wire, diameter 1.25 mm kg 8,261
2010237318750 Spacers pieces 123,915
2922140006703 Window crane, capacity 0.0015 meganewtons
(MN) (0.15 ton-force (tf))
machine-
hours
33,251
94 RCsD02D
1
Rebar steel PC 52, diameter over 8 mm,
fabricated in a site workshop for
foundations and raft beams, installed in
existing structural elements. For flat
slabs, columns, beams, etc.
kg 12 574,80
7123020011140 Rebar worker man-
hours
1 243,648
9310060019920 Worker servicing ST man-
hours
433,831
2710602000038 Plain rebar steel PC 52, diameter over 8 mm kg 12 889,17
2746133803142 Ordinary soft wire, diameter 1.25 mm kg 125,748
2010237318750 Spacers pieces 1 886,22
2922140006703 Window crane, capacity 0.0015 meganewtons
(MN) (0.15 ton-force (tf))
machine-
hours
506,136
Total Floors at elevation
0.000
Total Slab
6. Wall strengthening
95 RCsB04D
Ready-mix concrete delivered from the
ready-mix concrete plant and placed by
conventional means in columns, beams,
ribs, slabs, landings, staircases, retaining
walls, reinforced concrete pads, floor
slabs, diaphragms, stair flights, etc., in
existing buildings / C20/25 (M350)
Small materials (boards, wire, nails, etc.) = 1,020
m³ 33,00
7123010010200 Concrete worker man- 166,221
1 2 3 4 5
hours
9310060019920 Worker servicing ST man-
hours
91,459
2663102100000
20
Concrete C20/25 m³ 34,502
4100116202818 Water for mortars and concrete m³ 4,039
2952270003101 Poker vibrator machine-
hours
22,77
3410520001373 Truck crane, 5 ton-force (tf) machine-
hours
5,692
96 CB03E
Formwork from reusable plywood panels,
15 mm thick, for concreting slabs and
beams in structures up to 20 m in height
inclusive, excluding fastenings
m² 170,00
9310060019920 Worker servicing ST man-
hours
29,325
7124010010700 Carpenter man-
hours
166,175
2874125881241 Standard washers M10 kg 0,85
2874115841033 Standard square nuts M10 pieces 51,00
2874115825003 Standard square bolts M10 × 140 mm pieces 51,00
2875276311528 Steel construction staples kg 5,10
2873145887000 Conical head nails, type A kg 5,10
2030122928385 Formwork panel with 15 mm plywood m² 22,10
2010102904340 Softwood planks m³ 0,17
2010102903495 Softwood boards m³ 0,17
2320187315789 Formwork release agent (Decofrol) kg 20,40
3410520006752 Truck crane, 6–10 tf machine-
hours
3,91
97 RCsD02D
Rebar steel OB 37, with diameter over 8
mm, fabricated in a site workshop for
foundations and raft beams, installed in
existing structural elements. For flat
slabs, columns, beams, etc.
kg 1 633,00
7123020011140 Rebar worker man-
hours
146,48
9310060019920 Worker servicing ST man-
hours
56,338
2710602000035 Plain rebar steel OB 37, diameter over 8 mm kg 1 673,825
2746133803142 Ordinary soft wire, diameter 1.25 mm kg 16,33
2010237318750 Spacers pieces 244,95
2922140006703 Window crane, capacity 0.0015 meg
Стр. 32–33
ebar steel OB 37, diameter over 8 mm kg 1 673,825
2746133803142 Ordinary soft wire, diameter 1.25 mm kg 16,33
2010237318750 Spacers pieces 244,95
2922140006703 Window crane, capacity 0.0015 meganewtons
(MN) (0.15 ton-force (tf))
machine-
hours
65,728
98 RCsD02D
1
Rebar steel PC 52, diameter over 8 mm,
fabricated in a site workshop for
foundations and raft beams, installed in
existing structural elements. For flat
slabs, columns, beams, etc.
kg 4 211,00
7123020011140 Rebar worker man-
hours
416,468
9310060019920 Worker servicing ST man-
hours
145,279
1 2 3 4 5
2710602000038 Plain rebar steel PC 52, diameter over 8 mm kg 4 316,275
2746133803142 Ordinary soft wire, diameter 1.25 mm kg 42,11
2010237318750 Spacers pieces 631,65
2922140006703 Window crane, capacity 0.0015 meganewtons
(MN) (0.15 ton-force (tf))
machine-
hours
169,493
99 RCsD08A
Installation of welded meshes STM or
STNB on walls and diaphragms with
weight up to 3 kg/m²
Small materials = 1,050
kg 211,00
7123020011140 Rebar worker man-
hours
16,986
9310060019920 Worker servicing ST man-
hours
0,971
2873122004111 Welded meshes STM or STNB kg 223,766
2710602000030 Plain rebar steel OB 37 STAS 438 diameter 6 mm kg 1,108
2746133803142 Ordinary soft wire, diameter 1.25 mm kg 2,216
2523156719079 Plastic spacer pieces 33,233
2922140006703 Window crane, capacity 0.0015 meganewtons
(MN) (0.15 ton-force (tf))
machine-
hours
0,146
100 CL18A
Various metal products made of rolled
profiles, sheet steel, checkered and
reinforcing steel, and pipes for supports
or coverings, fully or partially embedded
in concrete
kg 345,00
7214240021810 Construction locksmith (metal fitter) man-
hours
75,382
9310060019920 Worker servicing ST man-
hours
3,967
7212030022700 Welder man-
hours
3,967
2734113803207 Soft black wire, diameter 2 mm kg 3,45
2775276309886 Metal fabrications embedded in concrete kg 345,00
2873155901200 Welding electrodes kg 1,725
4011106202741 Electrical energy kw 2,76
1010126200341 Forge coal (hard coal) kg 5,175
101 IzD10A
Anticorrosion painting by brush of metal
products and structures, one coat of
anticorrosion primer based on red lead
and two coats of chlorinated rubber
enamel.
tonne 0,345
7141020013400 Industrial painter man-
hours
2,555
2430116100000 Chlorinated rubber enamel kg 2,691
2430226100814 Red lead primer G 355-6 kg 1,345
2430226109420 Thinner for anticorrosive varnishes D.006-1 NI
1708-61 A1
kg 0,19
2320166200676 White spirit kg 0,673
1711317306661 Cleaning cotton kg 0,336
Total Wall strengthening
Стр. 33–34
30226109420 Thinner for anticorrosive varnishes D.006-1 NI
1708-61 A1
kg 0,19
2320166200676 White spirit kg 0,673
1711317306661 Cleaning cotton kg 0,336
Total Wall strengthening
Total
Social fund
Total
Transportation of materials
Storage expenses
Direct expenses
Overhead expenses
Total
Estimated profit
Total estimate:
Including wages
Subsemnata, Poleacova Ana, tradu cător
autorizat, (limba Englez ă), certific
exactitatea traducerii cu textul
înscrisului, care a fost vizată de mine şi
port răspundere personală pentru
corectitudinea traducerii actului.
Undersigned, Poleacova Ana, sworn translator,
(English language), c ertify the authenticity of
the translation which corresponds to the text
of the authentic document, which was
confirmed by me and I do take personal
responsibility for the truthfulness of the
translation.
26.02.2026
Semnătura
Signature
Translator’s stamp: /Republic of Moldova,
Authorization AT No. 461 of 10.02.2014, AT No. 500 of 21.07.2014,
English, French, Romanian, Russian, Translator
Предпросмотр носит справочный характер. Юридически значим только официальный оригинал в источнике.