utv platform_modificat eng.signed.signed.signed.signed.pdf

Specifications TECHNICAL 
UTV+ special vehicle trailer ( platform furniture ) 
 
The specifications are an integral part of the award documentation of the 
supply contract for “ UTV + Type Vehicle trailer ( platform  mobile ) " whose 
purpose is to establish the essential elements/conditions that will govern the 
supply contract and constitutes the set of requirements based on which each 
bidder develops the technical proposal. 
 
1. GENERAL REQUIREMENTS 
type vehicle , multifunctional , intended for operational interventions and in 
hard-to-reach places, capable of transporting both passengers and cargo weighing 
approximately 650 -900 kg on paved and hard -to-reach roads. The vehicle must 
comply with the regulations in force for circulatio n on national and international 
roads. 
     1. Rules and standard 
1.2 The fully equipped prototype of the vehicle will undergo, before the 
first delivery, a verification program drawn up by specialists from the General 
Inspectorate for Emergency Situations and  those of the supplier, in order to 
determine whether the transport unit (including equipment) meets the technical -
tactical performances of this technical specification. 
1.3 The delivered vehicle will comply with the provisions of the Decision 
of the Governmen t of the Republic of Moldova No. 357 of 13.05.2009 on the 
approval of the Road Traffic Regulations with subsequent amendments and 
supplements; 
1.4 The delivered vehicle will comply with the requirements of this 
Specification. 
1.5 We mention that the car will circu late both in the territory of the 
Republic of Moldova and in the countries of the European Union and must ensure 
the minimum requirements for circulation on public roads in these regions, 
possibly complying with the provisions of Directive 2007/46/EC which  establishes 
the safety and environmental requirements that motor vehicles must comply with 
before being introduced on the EU market.
1.6    Description general : 
1. 
 
Description of the 
good (functional 
characteristics) and 
quantity required 
for purchase 
4x4 UTV vehicle – 
2. The destination of 
the good and the 
purpose of its use 
4x4 UTV vehicle , for removal PERSONNEL 
and service equipment 
3. Technical 
characteristics of 
the good 
Dimensions/capacity 
Weight  750-900 kg 
L x W x H  350-450x150-180x170-200 cm 
wheelbase 260-300 cm 
Ground clearance 30-40 cm 
rear cargo box dimensions 150-200 times 120-
150 x 20-30cm 
Capacity bucket back 500 - 650 kg 
Capacity of people 3 
Capacity loading TAILGATE 100-150 kg 
Total storage capacity  : 350-400 L Towing 
capacity1000-1500 kg 
Payload capacity 650-900 kg 
Fuel tank   35-50 l 
Fuel type: Gasoline 
Dynamic Power Steering (DPS) 
• System ABS 
• Minimum 14 in. rims. (35.6 cm) aluminum 
• Minimum 27 in. (68.6 cm) 
•Winch minimum 4,500-lb capacity (2,000 kg) 
Motor 
Type 60-80 kW (80-110 hp ), cooling with 
liquid 
feeding Intelligent Throttle Control ( iTC ™) 
with injection heads 
Transmission box automati

m) 
•Winch minimum 4,500-lb capacity (2,000 kg) 
Motor 
Type 60-80 kW (80-110 hp ), cooling with 
liquid 
feeding Intelligent Throttle Control ( iTC ™) 
with injection heads 
Transmission box automatically PRO-
TORQ CVT with system QRS, fan with flow 
high of air and electronic transmission belt 
protection , Extra -L / H / N / R / P gears 
Drivetrain Selectable  mode Turf / 2WD / 
4WD with front limited-slip differential with 
ABS SYSTEM
Assistance TO lead System electronic 
assistance DOWN in slope MODES ECO™ / 
ECO™ Off / Work 
Brake of parking 
Power steering Dynamos Power Steering 
(DPS) 
suspension 
Front suspension Double A-arm / Front shock 
absorbers Gas 
Rear suspension TTA with bar stabilizing 
Mufflers back Gas 
Tires /Rims 
TIRES front & back 27 x9 / 11 x 14 in. (68.6 x 
22.9 / 27.9 x 35.6 cm) 14in. (35.6 cm) 
aluminum wheels 
Brakes 
Front Two DISCS fan minimum 220 mmm, 
with hydraulic calipers and twin pistons 
Rear Two ventilated discs of at least 220 mm, 
with 1-piston hydraulic calipers 
 
4. Equipment 
requirements 
(facilities) 
 
 
 
 
 
 
 
 
 
 
 
 
Clock digital Display digital diagonal 12-V 
battery (30 amp/h) 
Magneto 
Other EQUIPMENT Cigarette lighter socket 
in the console (10- A) and Trailer socket 
Lighting system  4 
headlights (power total 100-
150 W) and Stop back type 
LED Winch Capacity 2000-
2200 kg 
seat Verse Pro with Seat seat passengers 
folding and hook of Steering wheel grip 
Adjustable 
Integrated front bumper protection Steel 
Shield central HMWPE Front fender 
extensions 
Type of hook Ball TOW 2-in., hook tow back,
snuff tow 
Features How. T 
Horn, lights of position and turn signals, 
mirrors rearview mirrors, License plate 
bracket, front metal bar hook 
 
5. Description of the 
good (functional 
characteristics) and 
quantity required 
for purchase 
trailer ( platform furniture ) 
6. The destination of 
the good and the 
purpose of its use 
trailer ( platform furniture ) for removal UTV 
7. Technical 
characteristics of 
the good 
Trailer ( platform furniture ): 
Task total – up to 3500 kg; 
Loading capacity 1800 – 2800 kg ; 
Length useful – from 500 to 620 cm; 
Width useful – 210 cm; 
Braking system – with braking ; 
Number of axles – 2 axles; 
Mass own – 700-850 kg ; 
Material – minimum 3mm steel , galvanized 
thermal or aluminum ; 
Wheel positioning – under the trailer ; 
Shape – straight , rings metal car anchor with 
grip lateral on chassis ; 
Ground clearance / height – 50-67 cm ; 
Wheel chocks– 2 wedges included ; 
ramps loading – 2 loading ramps 2-2.5m ; 
Size wheels – R13-R14 with fenders mud ; 
Spare wheel – yes ; 
Winch – winch support and manual winch ; 
Electrical system/wiring– 13 pins / 12v in 
compliance with EU standards , lights position 
front , sides , back; 
Support leg – 1pc - automatic with wheel 
Weight training , 2pcs - with grip support . 
8. Requirements 
regarding the 
condition of the 
delivered goods 
The good and all its components must be 
NEW (previously unused, not 

matic with wheel 
Weight training , 2pcs - with grip support . 
8. Requirements 
regarding the 
condition of the 
delivered goods 
The good and all its components must be 
NEW (previously unused, not refurbished or 
assembled from reconditioned components) 
Year of production - no more than 12 months 
from the signing of the contract
9. requirement 
regarding 
accompanying 
documents 
The supplier must submit the following 
documents: 
- invoice fiscal ; 
- manuals , maintenance books  and repairs , 
all in language Romanian ; 
the complete set of documents required for 
vehicle registration with the competent 
authorities, in accordance with national 
legislation on vehicle registration and 
circulation. 
10. Requirements 
regarding duration 
and GUARANTEE 
quality 
 Warranty term: minimum 3 years or 
100,000 km (bidder specifies). 
 The warranty period will be presented by 
the supplier, issued by the manufacturer for 
the offered good. 
The warranty period begins from the date of 
final receipt of the good. 
11. requirement 
regarding 
GUARANTEE and 
after- sales services 
 The supplier must have at least 2 authorized 
service centers in Chisinau and Balti or have a 
valid collaboration agreement with an 
authorized service center located in the 
Republic of Moldova and the European 
Union, which ensures service during the 
warranty period. 
 The bidder will present, when submitting 
the bid, a copy of the authorization of its own 
service or a copy of the collaboration 
agreement signed with an authorized service. 
The maximum term for perfo rming 
maintenance and repair works will not exceed 
30 (thirty) calendar days from the moment of 
the written notification sent by the beneficiary 
to the supplier. 
12. Compliance, 
approval and 
applicable 
regulatory 
requirements 
 Motor vehicles completely manufactured 
or completed and approved in accordance with 
the provisions of UN Regulation No. 107EC. 
 The vehicles offered must comply with 
Regulation (EU)2018/858 of the European 
Parliament and of the Council of 30 May 2018 
on the approval and market surve illance of 
motor vehicles and their trailers, and of 
systems, components and separate technical 
units intended for such vehicles, amending
Regulations (EC) No. 715/2007 and (EC) No. 
595/2009 and repealing Directive 2007/46/EC. 
 Motor vehicles must comply wi th the 
applicable harmonised standards on road 
safety and environmental protection . 
 When bidding , the supplier will present 
the EU type -approval certificate, issued by 
the competent authorities of an EU member 
state, in original or a copy conforming to t he 
original. 
 
3. RECEPTION 
The vehicle will be delivered within 90 ( ninety ) days from the date of 
conclusion of the contract at the headquarters of the Directorate . REGIONAL 
search and rescue unit no. 2 of the General Inspectorate for Emergency Situations 
located on Moscovei Street 1, Bălți municipality. 
After delivery of the vehicle and its equipment,

orate . REGIONAL 
search and rescue unit no. 2 of the General Inspectorate for Emergency Situations 
located on Moscovei Street 1, Bălți municipality. 
After delivery of the vehicle and its equipment, they will be tested. The 
testing period will last 7 days. Once the testing period is completed, an Acceptance 
Form will be signed, in accordance with the legislation of the Republic of Moldova 
in force. Once the Acceptance Form is issued, the warranty period will begin, 
during which defects will be reported, and the defective equipment 
(parts/equipment) will be replaced without any fees.
ELABORATE: 
 
 
Deputy Head of the Regional Search and Rescue Directorate No. 2 of the GIES 
major of internal service     Constantin TARÎȚE 
 
 
 
Acting Head of the Scubadiving Service 
of the Regional Search and Rescue Directorate No. 2 of the GIES  
captain of internal service     Veaceslav TOCAREV 
 
 
 
Head of logistics service 
of the Regional Search and Rescue Directorate No. 2 of the GIES  
captain of internal service     Radu ANTOCI 
 
 
 
 COORDINATED: 
 
 
Head of heritage management and  
infrastructure development of IGSU of MAI          
colonel of the s/intern                 Corneliu EȘANU